At a minimum, you must have this to have a chance of getting the best from the course – all the values will be controlled with it. It’s only $10 so won’t break the bank, and will be very useful to you even after the workshop is over.

Brushes

To a large  extent, which brushes you use is a personal choice and is not too critical.  But here are a few guidelines and recommendations.

Try to make sure you have a few good sized brushes – about a half inch at least.

You can use synthetics or hog bristle, or – as I do – some of both. Synthetics are good for a finer, smoother finish and also for careful edge control and blending.

More springy, natural bristle hogs are good for texture and a brushy finish. Sometimes rough hogs that are a little splayed and worn are good too, they prevent you from getting too obsessed with perfection too soon!

I’d suggest the following, but bear in mind this is just a guide. If you have brushes you particularly like, by all means use them:

• 2 x hog flat or filbert, large-ish – size 8 or 5/8 inch ferrule
• 2 x smaller hog filberts, size 2 or 1/4 inch ferrule
• 2 x half inch flat synthetics, Rosemary’s angled eclipse (long handle), long ivory flats (very firm!) or evergreen are all good
• 2x quarter inch synthetics – Rosemary’s angled eclipse 1/4 inch are perfect.
• one a half inch or larger synthetic flat for softening – the Winsor and Newton Scepter Golds linked below are great for this.
• A large, soft, watercolour or acrylic wash brush – something like this – for softening
• I would also make sure you have a couple of small synthetic rounds for details, size 1 and 2.

Advice on Synthetics

Any soft, synthetic flats will do, but here are some brands to consider:

Winsor and Newton Sceptre Gold – whilst they unfortunately have short handles, (although I have heard you can get them with long handles now…) the ‘long stroke’, series 606, are very good brushes, both for painting and softening.

NOTE: These are not completely synthetic, I think they are a sable and synthetic mix, so if you don’t want to use natural hair in your brushes, you won’t want these. Any soft, flat synthetic will do in their stead.

https://www.dickblick.com/items/05843-1004/

For the larger soft synthetic flat for dry brush blending and softening, brand isn’t important, it just needs to be very soft.The best ones I’ve found are watercolour wash brushes.

Advice on Bristle

These are fantastic when you want to add some dynamism and texture. I’ll be using hog bristle brushes too in this workshop. Brand isn’t critical but do get quality if you can. I like Cornelissens best, but they may take a while to ship to the US. In those brushes, if you can manage it, I’d get a size 1, a couple of size 3 and a size 5 or 6.

Winsor and Newton are also pretty good.

Synthetic rounds

The Sceptre Gold (https://www.dickblick.com/items/05003-1000/) will be good here, I think probably size 1 and 2 will be useful. They’re also useful to use dry for very fine detailed edge softening.

Tube Paints

Whilst I’m going to try to give you as many options as I reasonably can for reaching the colours we’ll be mixing, it will probably be easier for you if you have at least some of the same tube paints as me. This list will cover most eventualities in the course and also give you a good foundation that covers a wide range of colours without having too many tubes.

If you want to use your own preferred tube paints, that’s fine of course.

All colours are Michael Harding unless otherwise noted

• White – I’d recommend a lead white, buit titanium will work too if you don’t want to use lead-based paint. My favourite is Lead White (#1 or #2) from Rublev
• Cadmium yellow (Cadmium Yellow pale if Winsor and Newton)
• Bright Yellow Lake (any arylide yellow like Hansa Yellow will also do well here) or Cadmium Lemon Yellow
• Quinacridone rose
• Green gold (Williamsburg is cheaper than Maichael Harding and much the same)
• Transparent red oxide
• Cobalt blue
• Ultramarine Blue
• Raw umber
• Ivory Black
• Phthalo green. Winsor and Newton Winsor Green is perfect. If you prefer to mix your greens from blue and yellow, you won’t need this, but may struggle to reach the the same greensd as I’m using at times.

Texture

Particularly for landscape, adding texture makes a big difference. Sandpaper, steel wool, etc can be useful. Sandpaper is also good to apply before a second coat on a painting. I’d recommend about a 400 grit and a smoother, around 800 grit. You’ll also need either kitchen roll or a soft cloth to wipe out with. “Paint shapers” can be useful too.

Surface

For this course we’ll be working on Ampersand Gessobord Panels. You can use the cradled or the uncradled. We’ll be producing three main paintings, two smaller 8 x 10 inch, and one larget 9 x 12. Having a two or three smaller 5 x 7 panels too will alow you you to experiment a litlte with colour studies.

Ampersand Panels:

https://www.dickblick.com/products/ampersand-gessobord/

Other stuff

• Palette knife
• Make up sponge for oiling out
• “Paint shaper” brushes. Some ideas: https://www.dickblick.com/products/colour-shapers-tools/?fromSearch=%2Fsearch%2F%3Fsearchword%3Dsilicon%20shaper (optional)